Connect your servos directly to a battery-powered receiver using the Graupner PSD Servo Voltage Controller, making possible mixed operation of conventional and high-voltage servos through one receiver. Connect your two servos to two receiver channels in one device!
For 2 Servos
Input voltage
Approx 1.8 - 8.5V (2-cell LiPo batteries)
Output voltage
Approx 5.9V
(If the input voltage is >5.9V, the output Voltage equals the input voltage)
Current Capacity
(< 167° F / 75° C)
8A For Approx. 5sec at 7.4V
2.5A For Approx. 50sec at 7.4V
1.5A For Approx. 120sec at 7.4V
